Features:
• Spindle supported by precision tapered roller bearings.
• Hardened and ground bedways.
• Power longitudinal feed allows threading.
• Standard 1-1/2" x 8 TPI spindle mount allows for many aftermarket accessories.
• Reversing switch included for added versatility.
• Backlash adjustments provided throughout the carriage.
• Tailstock is adjustable for taper cuts.
• Quick-change gear box provides wide range of inch and metric threads.

Standard Equipment:
• 7" 4-jaw and 4" three-jaw chuck with threaded back plate
• Face plate
• Four-way tool post
• Single tool post
• Steady and follow rest
• Metric change gears
• Centers
• Threading dial
• Tool box and tools

Specifications:
• Swing Over Bed (In.) 8-3/4
• Swing Over Cross Slide (In.) 5-1/4
• Distance Between Centers (In.) 20
• Hole Through Spindle (In.) 25/32
• Spindle Mount (in. xTPI) 1-1/2 x 8
• Spindle Taper MT-3
• Spindle Speeds 6
• Spindle Speed Range (RPM) 130-2,000
• Longitudinal Feeds 27
• Longitudal Feed Range (in. /rev.) 0.005-0.011
• Inch Threads 27
• Inch Thread Range 8-56TPI
• Metric Threads 11
• Metric Thread Range (mm) .5-3
• Maximum Tool Size (In.) 1/2x1/2
• Compound Slide Travel (In.) 1-7/8
• Cross Slide Travel (In.) 5
• Carriage Travel (In.) 16
• Tailstock Spindle Travel (In.) 1-9/16
• Taiistock Spindle Taper MT-2
• Steady Rest Capacity (In.) 1-7/8
• Follow Rest Capacity (In.) 1-7/8
• Bed Width (In.) 4-7/8
• Dimensions w/Stand 37-1/2"L x 20"W x 45"H
• Motor (TEFC) 3/4HP, 1Ph, 11 5V only
• Net Weight (Lbs.) 235

Manufacturer:	Jet Tools and Equipment
Manufacturer P/N:	321373

This item ships via freight truck and is not eligible for expedited shipping.
Free freight on this item only applies to commercial deliveries.

**If you require a lift gate delivery an additional charge of $160.00 per pallet will apply.