Features:
• Uniquely designed exclusively by JET.
• ISO 9001 certified manufacturer.
• 3-1/8" bore spindle is supported by two tapered and one ball bearing.
• Chrome molybdenum headstock gears are hardened, ground, and shaved.
• Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required.
• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces.
• T-slotted compound slide featuring a four-way tool post.
• One-piece cast iron base absorbs vibration allowing heavier cuts.
• High quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground.
• Removable gap allows up to 23-5/8" diameter work.
• Five-position automatic carriage stop increases productivity.
• Attractive chrome control levers, dials, and knobs complete this impressive package.
• Tolerance test certificate included.

Standard Equipment

• 10" 3-jaw chuck with top reversing jaws
• 12" 4-jaw chuck
• 12" Faceplate
• Four-way tool post
• Follow rest
• Large capacity steady rest
• Fully integrated coolant system
• Full length splash guard and coolant return
• Large easy to use foot brake
• Articulating halogen work lamp
• Centrally located controls with jog button
• Threading dial
• Mounting pads and levelers
• Spindle sleeve (MT-7 to MT-5)
• Dead center
• Live center
• Toolbox and adjusting tools

Specifications

• Swing Over Bed (in.) 14
• Swing Over Cross Slide (in.) 7-5/8
• Swing Through Gap (in.) 23-5/8
• Length of Gap (in.) 12-1/4
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 3-1/8
• Spindle Mount Dl-8
• Spindle Taper (With sleeve) MT-7 (MT-5)
• Number of Spindle Speeds 12
• Range of Spindle Speeds (RPM) 42 to l,800
• Number of Longitudinal and Cross Feeds 122
• Longitudinal Feeds Range (in./rev.) .0015-.0913
• Range of Cross Feeds (in./rev.) .0006-.0365
• Number of Inch Threads 61
• Range of Inch Threads 1-5/8 to 72
• Number of Metric Threads 24
• Range of Metric Threads (mm) 0.05 to 20
• Maximum Tool Size (in.) 1x1
• Maximum Compound Slide Travel (in.) 5-1/8
• Maximum Cross Slide Travel (in.) 9
• Maximum Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 5
• Tailstock Taper MT-4
• Follow Rest Capacity (in.) 1/2 to 3-1/2
• Steady Rest Capacity (in.) 3/8 to 7
• Width of Bed (in.) 13-3/8
• Dimensions 97-1/2"L x 40"W x 46-7/8"H
• Motor 7-l/2HP, 3Ph, 230/460V Prewired 230V
• Net Weight (lbs.) 5187

Manufacturer:	Jet Tools and Equipment
Manufacturer P/N:	321910

This item ships via freight truck and is not eligible for expedited shipping.
Free freight on this item only applies to commercial deliveries.

**If you require a lift gate delivery an additional charge of $160.00 per pallet will apply.